Microfluidic cartridge with integrated array of amorphous silicon photosensors for chemiluminescence detection of viral DNA

Portable and simple analytical devices based on microfluidics with chemiluminescence detection are particularly attractive for point-of-care applications, offering high detectability and specificity in a simple and miniaturized analytical format. Particularly relevant for infectious disease diagnosis is the ability to sensitively and specifically detect target nucleic acid sequences in biological fluids. To reach the goal of real-life applications for such devices, however, several technological challenges related to full device integration are still to be solved, one key aspect regarding on-chip integration of the chemiluminescence signal detection device. Nowadays, the most promising approach is on-chip integration of thin-film photosensors. We recently proposed a portable cartridge with microwells aligned with an array of hydrogenated amorphous silicon (a-Si:H) photosensors, reaching attomole level limits of detection for different chemiluminescence model reactions. Herein, we explore its applicability and performance for multiplex and quantitative detection of viral DNA. In particular, the cartridge was modified to accommodate microfluidic channels and, upon immobilization of three oligonucleotide probes in different positions along each channel, each specific for a genotype of Parvovirus B19, viral nucleic acid sequences were captured and detected. With this system, taking advantage of oligoprobes specificity, chemiluminescence detectability, and photosensor sensitivity, accurate quantification of target analytes down to 70 pmol L-1 was obtained for each B19 DNA genotype, with high specificity and multiplexing ability. Results confirm the good detection capabilities and assay applicability of the proposed system, prompting the development of innovative portable analytical devices with enhanced sensitivity and multiplexed capabilities

Smartphone-based chemiluminescent origami µpad for the rapid assessment of glucose blood levels

Microfluidic paper analytical devices (µPADs) represent one of the most appealing trends in the development of simple and inexpensive analytical systems for diagnostic applications at the point of care (POC). Herein, we describe a smartphone-based origami µPAD for the quantitative determination of glucose in blood samples based on the glucose oxidase-catalyzed oxidation of glucose leading to hydrogen peroxide, which is then detected by means of the luminol/hexacyanoferrate(III) chemiluminescent (CL) system. By exploiting the foldable µPAD format, a two-step analytical procedure has been implemented. First, the diluted blood sample was added, and hydrogen peroxide was accumulated, then the biosensor was folded, and a transport buffer was added to bring hydrogen peroxide in contact with CL reagents, thus promoting the CL reaction. To enable POC applicability, the reagents required for the assay were preloaded in the µPAD so that no chemicals handling was required, and a 3D-printed portable device was developed for measuring the CL emission using the smartphone’s CMOS camera. The µPAD was stable for 30-day storage at room temperature and the assay, displaying a limit of detection of 10 µmol L−1, proved able to identify both hypoglycemic and hyperglycemic blood samples in less than 20 min

A smartphone-based chemosensor to evaluate antioxidants in agri-food matrices by in situ AuNP formation

In recent years, there has been a continuously growing interest in antioxidants by both customers and food industry. The beneficial health effects of antioxidants led to their widespread use in fortified functional foods, as dietary supplements and as preservatives. A variety of analytical methods are available to evaluate the total antioxidant capacity (TAC) of food extracts and beverages. However, most of them are expensive, time-consuming, and require laboratory instrumentation. Therefore, simple, cheap, and fast portable sensors for point-of-need measurement of antioxidants in food samples are needed. Here, we describe a smartphone-based chemosensor for on-site assessment of TAC of aqueous matrices, relying on the antioxidant-induced formation of gold nanoparticles. The reaction takes place in ready-to-use analytical cartridges containing an hydrogel reaction medium preloaded with Au(III) and is monitored by using the smartphone’s CMOS camera. An analytical device including an LED-based lighting system was developed to ensure uniform and reproducible illumination of the analytical cartridge. The chemosensor permitted rapid TAC measurements of aqueous samples, including teas, herbal infusions, beverages, and extra virgin olive oil extracts, providing results that correlated with those of the reference methods for TAC assessment, e.g., oxygen radical absorbance capacity (ORAC)

Smartphone biosensor for point-of-need chemiluminescence detection of ochratoxin A in wine and coffee

Exposure to mycotoxins, which may contaminate food and feed commodities, represents a serious health risk for consumers. Ochratoxin A (OTA) is one of the most abundant and toxic mycotoxins, thus specific regulations for fixing its maximum admissible levels in foodstuff have been established. Lateral Flow ImmunoAssay (LFIA)-based devices have been proposed as screening tools to avoid OTA contamination along the whole food chain. We report a portable, user-friendly smartphone-based biosensor for the detection and quantification of OTA in wine and instant coffee, which combines the LFIA approach with chemiluminescence (CL) detection. The device employs the smartphone camera as a light detector and uses low-cost, disposable analytical cartridges containing the LFIA strip and all the necessary reagents. The analysis can be carried out at the point of need by non-specialized operators through simple manual operations. The biosensor allows OTA quantitative detection in wine and coffee samples up to 25 μg L−1 and with limits of detection of 0.3 and 0.1 μg L−1, respectively, which are below the European law-fixed limits. These results demonstrate that the developed device can be used for routine monitoring of OTA contamination, enabling rapid and reliable identification of positive samples requiring confirmatory analysis

Immunological analytical techniques for cosmetics quality control and process monitoring

Cosmetics analysis represents a rapidly expanding field of analytical chemistry as new cosmetic formulations are increasingly in demand on the market and the ingredients required for their production are constantly evolving. Each country applies strict legislation regarding substances in the final product that must be prohibited or regulated. To verify the compliance of cosmetics with current regulations, official analytical methods are available to reveal and quantitatively determine the analytes of interest. However, since ingredients, and the lists of regulated/prohibited substances, rapidly change, dedicated analytical methods must be developed ad hoc to fulfill the new requirements. Research focuses on finding innovative techniques that allow a rapid, inexpensive, and sensitive detection of the target analytes in cosmetics. Among the different methods proposed, immunological techniques are gaining interest, as they make it possible to carry out low-cost analyses on raw materials and finished products in a relatively short time. Indeed, immunoassays are based on the specific and selective antibody/antigen reaction, and they have been extensively applied for clinical diagnostic, alimentary quality control and environmental security purposes, and even for routine analysis. Since the complexity and variability of the matrices, as well as the great variety of compounds present in cosmetics, are analogous with those from food sources, immunological methods could also be applied successfully in this field. Indeed, this would provide a valid approach for the monitoring of industrial production chains even in developing countries, which are currently the greatest producers of cosmetics and the major exporters of raw materials. This review aims to highlight the immunological techniques proposed for cosmetics analysis, focusing on the detection of prohibited/regulated compounds, bacteria and toxins, and allergenic substances, and the identification of counterfeits

In-parallel polar monitoring of chemiluminescence emission anisotropy at the solid-liquid interface by an optical fiber radial array

Chemiluminescence (CL) detection is widely employed in biosensors and miniaturized analytical devices since it offers high detectability and flexible device design (there are no geometry requirements for the measurement cell, except the ability to collect the largest fraction of emitted photons). Although the emission anisotropy phenomenon for an emitting dipole bound to the interface between two media with different refractive index is well known for fluorescence, it is still poorly investigated for CL reactions, in which the excited-state reaction products can diffuse in solution before the photon emission event. In this paper, we propose a simple method for the realtime evaluation of the CL emission anisotropy based on a radial array of optical fibers, embedded in a poly(methyl methacrylate) semicylinder and coupled with a Charge-Coupled Device (CCD) camera through a suitable interface. The polar-time evolutions of the CL emission have been studied for catalyzing enzymes immobilized onto a solid surface (heterogeneous configuration) or free in solution (homogeneous configuration). Evidence of the anisotropy phenomenon is observed, indicating that the lifetime of the excited-state products of the enzyme-catalyzed reactions is shorter than the time required for their diffusion in solution at a distance at which the CL can be considered isotropic. These results open new perspectives in the development of CL-based miniaturized analytical devices

APHRODITE: Design and Preliminary Tests of an Autonomous and Reusable Photo-sensing Device for Immunological Test aboard the International Space Station

Preliminary results of the design and manufacturing of APHRODITE, a compact and versatile device for carrying out analyses of biological fluids during space missions that will be used as a technological demonstrator on board the International Space Station (ISS) for the quantitative determination of salivary biomarkers indicators of alterations of functionality of the immune system. The paper addresses the design of the main subsystems of the analytical device and the preliminary results obtained during the first implementations of the device subsystems and testing measurements. In particular, the system design and the experiment data output of the lab-on-chip photosensors and of the front-end readout electronics are reported in detail

Meconium pseudocyst secondary to ileum volvulus perforation without peritoneal calcification: a case report

<p>Abstract</p> <p>Introduction</p> <p>A case of giant meconium pseudocyst secondary to ileum volvulus perforation is presented. Conventional radiographic features of meconium peritonitis with secondary meconium pseudocyst formation are well described. Our case is unusual in comparison to other cases reported in the literature and needs to be reported because the meconium pseudocyst presented without the typical ultrasound features (calcifications, polyhydramnios and ascites) and was initially identified as an abdominal mass.</p> <p>Case presentation</p> <p>We describe the case of a 29-year-old Caucasian woman in her third trimester of pregnancy, in which an abdominal mass was detected in the fetus. The newborn was diagnosed in the early neonatal period with meconium pseudocyst secondary to ileum volvulus perforation.</p> <p>Conclusions</p> <p>The prenatal appearance of a meconium pseudocyst can be complemented by other signs of bowel obstruction (if present) such as polyhydramnios and fetal bowel dilatation. This is an original case report of interest to all clinicians in the perinatology and fetal ultrasound field. We consider that the utility of this case is the recognition that a meconium pseudocyst might appear without the typical ultrasound features and should be considered as a differential diagnosis when an echogenic intra-abdominal cyst is seen.</p

seasonal abundance of the nearctic gall midge obolodiplosis robiniae in italy and the impact of its antagonist platygaster robiniae on pest populations

The Nearctic gall midge Obolodiplosis robiniae (Haldeman, 1847) (Diptera Cecidomyiidae) infesting black locusts, Robinia pseudoacacia L. (Fabaceae), was detected in Asia in 2002 and in Europe (first in Italy) in 2003. Its distribution in Europe has expanded dramatically, probably favored by extensive distribution of its host plant along the main routes. The results of a 3-yr study on the seasonal abundance of O. robiniae in northern Italy are reported here. O. robiniae can develop three to four generations per year by exploiting plants of different ages and vigor. Overwintering takes place as diapausing larvae and adults emerge in spring. Two generations are completed on mature plants where populations decline in summer. Two additional generations can develop on root suckers from midsummer onward. Pest population densities reach their highest levels in late spring. Gall midge larvae were attacked by various predators, but parasitism by the platygastrid Platygaster robiniae Buhl & Duso was particularly significant. The impact of parasitism by P. robiniae is indicated as a key factor in reducing O. robiniae population densities